Last week Danielle was ordering some stuff off of Amazon, and I asked her to look up Ultrasonic Sensors, she did and they should be here latter this week. But this is not about them. Instead is is about a related item that we purchased at the same time. A 37 piece sensor starter kit, from Robotlinking Inc. (though my kit the parts say that, but says Elego on all the documentation )… Continue reading “37 Sensor Kit”
FTC – First Tech Challenge
This week I started helping one of the local schools get ready for their upcoming FTC competition. Well…as of right now I have not done much other then gathering my ideas. It is a 4 person team, each with their own roles. They are running Java to control their robot, using Android phones.
KiCad – PCB Design Software
Eagle Cad is my preferred PCB design software thus far. Though its expense has encourage me to try out KiCad. Back in Jun 2015 I started to use KiCad. Below are a few notes that I have taken. Let me know if you are interested in some videos on this software. These notes are current as of 16 Jun 2015. Continue reading “KiCad – PCB Design Software”
CERTs for the Electronics Technician
As you may know I started my journey in Electronics through Ham Radio in the mid 90’s. Then about 15 years ago I went through a trade school learning more about basic electronics. After I was working for some time, I earned a BS in Computer and Information Science. A lot of jobs/vocations prefer that a person continue their education, if it doesn’t help with promotion it can help with job security. Most of all it helps stay current in today’s/tomorrow’s technology and keep our skills up. Below are a few CERTs I have started or would like to have. Most of these CERTs and courses are either low cost or free.
My start with PCBs (Printed Circuit Board)
I have been making my own PCBs (Printed Circuit Boards) for some time now. First, I had to create the schematic using software like EagleCad or KiCad. Most of my work has been done in EagleCad, though KiCad is free. Then from the schematic I go to creating the board layout. Dell-Ray got me stated in using this software, and thought me the basics. If there is any interest, I might be willing to make some youtube videos on EagleCad or anything else I am covering here. Well after I design the circuit and its board layout the next task is to get that design onto a board. Here I will talk a little on my journey through making circuit board. Starting off with chemical etching, then why I moved onto using a CNC router. Last, some of the pitfall to doing it your self.
Continue reading “My start with PCBs (Printed Circuit Board)”
Time Lapse Photogrophy
Time Lapse photography has been an interest of mine for a very long time, but I have not had the proper gear. Some cameras, such as my Nikon Coolpix, have a time lapse feature built in, but it is limited on the intervals for taking the photos. The professionals use a Intervalometer, also called a timer remote controller. Naturally, I wanted to make my own remote controller!
Update: It looks like I am not getting a bunch of junk mail from bots/spam. If you have a hard time getting an account on here or can not make a post, please leave me a private message on FaceBook. Thank you.
Previous: Sorry I have been deleting most user registration request, not because I don’t want to allow people access, but because most of the request I get is spam. I am trying to find a better spam blocker. The one i have now helps, but I don’t think it is doing the trick. If you have any suggestions on what to use, please leave a comment on your Face Book page. Thanks!
Today, 5 July 15, I have installed some plugins to WordPress. Hopefully this will changes things, and limit the spam!
DIY SWR Meter
Looking at projects I could do. Googled SWR + Arduino and this is what I found. This could help me along with some of my projects. One thing that would make it even better was if it could read Frequency. Yes, you should know the frequency from your radio, but having this function can lead to other projects.
Solar Powered Hydroponics Garden
Last year I built my first hydroponics garden. I was trying to do it all inside, and in doing so my lighting bill was eating away at my spending cash. This summer I have decided to move the garden outside where there is plenty of sun light. The only problem is I do not have power to run the pump. This is how I am getting around that issue.
W5BOB Transmit Converter
As you might have already seen from my previous post, I made my first 6 Meter Receiving Converter with Bob, W5BOB. Well he gave me his 6 meter transmit converter and together we modified it to work with my TS-120s HF radio. Knowing that I was new to ham radio, Bob typed up some simple instructions on how to operate the transmitting converter and gave me the basic schematics of the system.